0

I can't find the option to change audio device. Only see enter image description here

my goal is to use the audio jack on my motherboard

I run

pacmd list-cards

result:

1 card(s) available.
    index: 0
        name: <alsa_card.pci-0000_29_00.1>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
                alsa.card = "0"
                alsa.card_name = "HDA ATI HDMI"
                alsa.long_card_name = "HDA ATI HDMI at 0xfcf60000 irq 68"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:29:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "aaf0"
                device.product.name = "Ellesmere [Radeon RX 580]"
                device.string = "0"
                device.description = "Ellesmere [Radeon RX 580]"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: unknown)
                output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)
                output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)
                output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)
                output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (priority 5200, available: no)
                output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (priority 100, available: no)
                output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (priority 100, available: no)
                off: Off (priority 0, available: unknown)
        active profile: <output:hdmi-stereo-extra3>
        sinks:
                alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3/#50: Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)
        sources:
                alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3.monitor/#50: Monitor of Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "TV Monitor"
                hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-5: HDMI / DisplayPort 6 (priority 5400, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"

and I run

pacmd list-sinks

result:

1 sink(s) available.
  * index: 50
        name: <alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3>
        driver: <module-alsa-card.c>
        flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE 
        priority: 9030
        volume: front-left: 32889 /  50% / -17,97 dB,   front-right: 32889 /  50% / -17,97 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 50
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 2
        configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
        card: 0 <alsa_card.pci-0000_29_00.1>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 3"
                alsa.id = "HDMI 3"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "9"
                alsa.card = "0"
                alsa.card_name = "HDA ATI HDMI"
                alsa.long_card_name = "HDA ATI HDMI at 0xfcf60000 irq 68"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:29:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "aaf0"
                device.product.name = "Ellesmere [Radeon RX 580]"
                device.string = "hdmi:0,3"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo-extra3"
                device.profile.description = "Digital Stereo (HDMI 4)"
                device.description = "Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)"
                alsa.mixer_name = "ATI R6xx HDMI"
                alsa.components = "HDA:1002aa01,00aa0100,00100700"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "TV Monitor"
        active port: <hdmi-output-3>

I cant's set wit

pactl set-card-profile 0 output:analog-stereo
pactl set-card-profile 0 output:hdmi-stereo

Neither

It sounds perfect from the monitor but I need it to recognize the audio and microphone jacks to be able to use headphones

Any ideas?

Thanks!

0

Not sure if it will help you but more advanced audio control you can have by installing and using PulseAudio Volume Control. Check the AppStore.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.