0

I am getting this on my Acer S1002:

root@Acer-S1002:/home/andrzejl# journalctl -b -l -x --no-pager -p 3

-- Logs begin at Fri 2021-08-13 17:39:28 UTC, end at Sat 2021-08-14 10:26:27 UTC. --

Aug 14 10:16:22 Acer-S1002 kernel: acer_wmi: No WMID device detection method found

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: sensor power-up failed

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: ov2680 power-up err.

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:01: sensor power-gating failed

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: ACPI didn't mapped the OpRegion needed to access I2C address 0x5e.

Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: sensor power-up failed

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: ov2680 power-up err.

Aug 14 10:16:22 Acer-S1002 kernel: ov2680 i2c-OVTI2680:03: sensor power-gating failed

As far as I understand that's the camera module failing to load?

Just thought I would report this.

Kind regards.

Andrzej

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.